Back to top

Wall Formwork

Mammut 350

Cost-effective all-in system, setting the standard

Think big with Mammut 350

Mammut 350, quite simply scales new heights. This heavy-duty formwork’s outstanding feature is its ability to accommodate fresh concrete pressures of up to 100kN/m² over the entire surface. Easy to set up, it offers outstandingly short pour times for heights of up to 4m.

Large panel formats ensure rapid progress of work on site. Storey heights of up to 350cm can be cast with a single panel, with no need for vertical extension. Multiple corner configurations for a range of floor plans also speed up construction.

It will also significantly enhance the overall architectural appeal of any project. Ideal for use with fair-faced concrete, alkus all-plastic facing combined with the symmetrical tie-and-joint pattern ensures a visually pleasing finish.

SecuritBasic is a safety system for Mammut 350 and easy to install using a single component – the flange screw. A load bearing capacity of up to 200kg/m² guarantees start-to-finish safety throughout the assembly and concreting operations.

With standardised system components, a minimum of accessories and a closely tailored product range, Mammut 350 combines all the features that make MEVA systems the unbeatable solution for practical on-site operations.


Got a specific enquiry about Mammut 350?
Why not call our team on +1 937 328 0022

Computer model of Mammut 350 wall formwork


Flange screw
Single component for strong connection of all accessories, such as brackets, push-pull
props and alignment rails.


Multi-function profile
Made from closed hollow aluminium profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories, all attached with MEVA flange screw.



M-assembly lock
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.


Tie Holes
With conical anchor sleeve, welded-in from both sides.


Compatible with Mammut XT
Compatible with flexible Mammut XT wall formwork system which combines three tying methods in a single system.


Closed hollow profile
For high stability and long service life.
The Aluminium frames are made of three-chamber profiles with welded-in mitred joints. The profiles are equipped with a double groove and edge protection.



The rod fixture
For fixing to multi-purpose profile of upright or horizontal AluStar panels – for fast and
safe transportation on site.


Transport holes
Designed to take the lifting hook 60 for rapid loading/unloading and movement of panel stacks.



Bump notches
Fitted at four corners for panel widths of 125 cm and more to simplify adjustment and alignment with crow bar.


Hot dip galvanised frame
To facilitate cleaning and reduce concrete adhesion.
Considerable time and resources are saved on cleaning the formwork due to its reduced concrete adhesion.


Alkus all-plastic facing
No water absorption. Resistant to swelling and shrinkage. The smooth, robust surface guarantees a high-quality concrete finish, even after heavy use.

Heavy-duty formwork


  • Up to 8.75m² contact area per panel (350 x 250cm)
  • For storey heights up to 350cm without vertical extension

Universal application in industrial construction and civil engineering

Closed hollow steel frame profile

  • Structurally robust
  • Torsion-proof
  • Hot-dip galvanised to facilitate cleaning and reduce concrete adhesion

Smart multifunctional profile

  • Welded-in Dywidag nuts
  • All accessories, e.g. brackets, push-pull props and alignment rails, attached with MEVA flange screw

Tying for inclined or stepped-level formwork

  • Tie hole with conical steel anchor sleeve, welded in from both sides

Intelligent MEVA product design

  • MEVA assembly lock for a structurally continuous connection with only a few hammer blows
  • Bump notches for panel widths of 125cm and more to ­simplify adjustment and alignment with crow bar
  • High-quality alkus all-plastic facing with seven-year warranty

Compatible with Mammut XT

  • ​​Combines three tying methods in a single system

Time-saving, cost-effective system
The Mammut 350 wall formwork is a crane-dependent formwork system made of steel. It is ideally suited for use in projects that require a high-quality architectural concrete surface. Coherent element grading enables wide coverage of requirements, particularly for changing storey heights in:

  • Public, commercial and industrial construction
  • Civil engineering projects


For more detailed technical information please refer to the download tab which contains PDF information about this product.

Technical Information

Permissible fresh concrete pressure (to DIN 18218) over entire surface of 100kN/m² (DIN 18202, Tab. 3, Line 7).


Steel. Structurally robust.


350cm, 300cm, 250cm, 125cm.


250cm, 125cm, 100cm, 75cm, 55cm, 60cm, 45cm, 30cm, 25cm.

Largest panel size

Up to 8.75m² contact area per panel (350 x 250cm).


60cm, closed hollow steel profile. High stability and durability.

Protective coating

Hot-dip galvanised, surface post-treatment. Easy cleaning and reduced concrete adhesion.

Crane Independent

No. Requires crane assistance.

Tying System

DW Ø 15mm/90kN and DW Ø 20mm/120kN, double-sided tying.


Panels: M assembly lock. Stepless, friction-locked with just a few hammer blows.
Accessories: Welded-in DW-15 nuts, for quick and force-fit attachment of accessories with a single flange screw.


Symmetrical panels. Can be used horizontally and vertically.

Additional components

Column Panel, Inside Corner, Outside Corner, Hinged Inside Corner, Hinged Outside Corner, Stripping Corner, Fillers.


Available panel dimensions allow for trouble-free corner solutions with any wall thickness.


High-quality alkus all-plastic facing. 7-year warranty on all panels.


Mammut XT.

SecuritBasic system

Includes platforms, access ­ladders, safety cages, front railings, brace frames and side railings in one system.

MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.

For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..

Related products and accessories

All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.

Let our team help you select the right product.

Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.

These fields are required

This field is for validation purposes and should be left unchanged.

Subscribe to the MEVA newsletter

MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.


FormworkPress Magazine Issue April 2024 Mockup Stack
Close search and go back to site