Back to top

Wall Formwork

AluFix

Handset Formwork

AluFix is a lightweight aluminium handset formwork offering complete flexibility when constructing walls. The crane-free assembly and closed hollow profile makes this a versatile modular system that delivers best in class results.

With 50% less components than comparable plastic formwork it makes this a practical and cost effective formwork solution. In addition the wide choice of panel heights and widths gives you the flexibility to accommodate a range of scenarios, whilst the panel gives the perfect finish to facings. It is durable, repairable and sustainable, boasting up to 1000 pours.

As it is also compatible with our EcoAs panels and a wide range of accessories, AluFix is a versatile and cost effective solution for wall and slab formwork.

 

Got a specific enquiry about Alufix?
Why not call our team on +91 22 27563430

Cost-effective hand-set formwork

>
Illustration of alufix wall formwork
1

Multi-function profile
Made from closed hollow aluminium profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories, all attached with MEVA flange screw.

2

Flange screw
Single component for strong connection of all accessories, such as brackets, push-pull props and alignment rails.

3

Ergonomic grip profile
Made from stable, closed hollow aluminium profile for safe handling. Low panel weight and ergonomic grip ensure safe, non-strenuous working.

4

Tie holes
With a conical anchor sleeve welded in from both sides

A cutaway diagram of formwork tie holes

A cut-away section of tie-hole

5

High grade powder coating
To facilitate cleaning and reduce concrete adhesion. Considerable time and resources are saved on cleaning the formwork due to its reduced concrete adhesion.

6

aluminium-hollow-profile
Closed hollow profiles
For high stability and long service life. The Aluminium frames are made of three-chamber profiles with welded-in mitred joints. The profiles are equipped with a double groove and edge protection.

7

ea-assembly-lock

EA assembly lock
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.

8

internal-tie-hole-fitting

Internal tie holes
The 90 and 75 cm wide panels are provided with additional internal tie holes, set back from the edge, that allow tying without obstruction by waterstops and simplify the shuttering of foundations.

9

alkus-facing-panel

alkus all-plastic facing
No water absorption. Resistant to swelling and shrinkage. The smooth, robust surface guarantees a high-quality concrete finish, even after heavy use.

Flexible

  • 6 Panel heights and 6 panel widths for problem-free corner solutions with any wall thickness (See technical tab)

Crane-independent

  • Hand-set formwork, no need for a crane even on existing buildings, terrain, or where a crane is cost prohibitive

Multi-function profile

  • Made from closed hollow aluminium profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories

Ergonomic grip profile

  • Stable, closed hollow aluminium profile

High-grade powder-coated finish

  • Allows ease of cleaning and reduces
    concrete ­adhesion

Closed hollow profile

  • Reduced weight, high stability and long service life

Intelligent MEVA product design

  • MEVA assembly lock for structurally continuous connection with only a few hammer blows
  • High-quality  all-plastic facing with long-term, 7-year warranty

Versatile, adaptable and uncompromising
AluFix is the product of choice for crane-free assemblies that are required to deliver top-class results. The wide range of panel sizes provide a flexible solution for a range of applications including:

  • residential schemes
  • commercial schemes
  • civil engineering projects
  • municipal and infrastructure schemes
  • garden architecture and landscaping projects
  • refurbishment projects

For more detailed technical information please refer to the download tab which contains PDF information about this product.

Technical Information
Performance

(DIN 18218) over full ­surface of 50kN/m² (flatness tolerances to DIN 18202).

Materials

Aluminium, predominantly recycled aluminium.

Heights

350cm, 300cm, 270cm, 250cm, 150cm, 135cm.

Widths

90cm, 75cm, 55cm, 45cm, 40cm, 25cm.

Weight

135 x 90cm panel weighs just 24.1kg.

Profile

23mm, closed aluminium profile for high stability and durability.

Protective Coating

High-grade powder-coated finish with an impact- and scratch-resistant surface. Easy to clean.

Crane Independent

Yes. Hand-set formwork.

Connections

Panels: EA assembly lock. Stepless, friction-locked with just a few hammer blows.
Accessories: Welded-in DW-15 nuts, for quick and force-fit attachment of accessories with a single flange screw.

Tying System

DW Ø 15mm with admissible load capacity 90kN (DIN 18216), double-sided tying.

Orientation

Symmetrical panels can be used horizontally and vertically.

Components

Inside Corner, Outside Corner, Hinged Inside Corner, Hinged Outside Corner, Stripping Corner, Fillers.

Columns

AluFix column panels 150/75 and 300/75 allow inch-perfect shuttering for column cross-sections in 5 cm increments up to max. 60×60 cm side length.

Corners

Available panel dimensions allow for trouble-free corner solutions with any wall thickness.

Facings

High-quality all-plastic facing. 7-year warranty.
Option of 220g/m² phenolic coated birch plywood facing.

Compatibility

EcoAs.

MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.

For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here.

Related products and accessories

All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.


Let our team help you select the right product.

Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.

These fields are required

This field is for validation purposes and should be left unchanged.

Subscribe to the MEVA newsletter

MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.

 

Close search and go back to site