Select your region:
Circular Formwork
Radius
The flexible system for curved walls
Ahead of the curve.
MEVA systems excel through supreme standards of quality, efficiency and practical detailing. The tried-and-tested Radius circular formwork, with its high-grade, elastically deformable steel facing, is no exception.
The simple, fast erection, precise stepless adjustment of the curvature and statically reliable steel facing for consistently excellent concrete surfaces speak for themselves.
The flexible system for curved walls comprises ready-to-use formwork panels that accommodate radii upwards of 250 cm. Radius sections are connected with push-pull spindles. This integrated spindle system allows continuous on-site adjustment of the panels to the required radius. The location of the spindle system between the stiffening sections minimises the depth of the formwork panels and improves their stackability.
As a special service provided on request, MEVA employees will ensure precise adjustment of the radii or supply you with factory-built radius templates.
Radius is compatible with MEVA’s AluStar, StarTec, Mammut 350 and Mammut XT wall formwork systems.
Got a specific enquiry about Radius?
Why not call our team on +44 1827 60217
Easy vertical extension
with RS alignment rail and M assembly lock.
Box outs
Magnets used to attach box outs and triangular fillets.
Straightforward tying
Using anchor rails that fully exploit load capacity of DW 20 tie rod.
Integral spindles
Simple, accurate setting of required radii using integrated spindles and ratchet.
A top performer
- 60 kN/m² fresh concrete load capacity, for tall elements, high pour speeds and large formwork cycles
- Panel connection with MEVA assembly lock
- Fast, trouble-free junctions with straight walls
- Uniform working method, streamlined logistics
- Rapid, labour-saving assembly
Intelligent design
- Millimetre-perfect setting of required radii using integrated spindles
- Coated steel facing
Safe and efficient
- Integral crane eye bolt
- Enhanced corrosion resistance, thanks to high-grade powder-coated finish plus additional priming and cavity sealing
- Straightforward bracing, with standard MEVA components
Adjusting the curve
The flexible system for curved walls comprises ready-to-use formwork panels accommodating radii upwards of 250 cm
- Curved walls in all schemes.
Simple height adjustment
Use of foot spindle to offset uneven bases.
Special coating
Coated, elastically deformable steel facing, meeting the most stringent fair-faced concrete requirements.
Integral spindles
Simple, accurate setting of required radii using integrated spindles and ratchet.
For more detailed technical information please refer to the download tab which contains PDF information about this product.
| Technical Information | |
|---|---|
| Performance | Permissible fresh concrete pressure absorption (DIN 18218) 60kN/m². |
| Outside Panels | 250 x 150cm, 250 x 300cm, 250 x 350cm, 125 x 150cm, 125 x 300cm, 125 x 350cm. |
| Inside Panels | 240 x 150cm, 240 x 300cm, 240 x 350cm, 120 x 150cm, 120 x 300cm, 120 x 350cm. |
| Increments | Continuously adjustable. |
| Materials | Steel. |
| Radii | From 250cm upwards. |
| Protective Coating | High-grade powder-coated finish plus additional priming and cavity sealing. |
| Crane Independent | No. Requires crane assistance. |
| Tying System | Anchor rails and DW Ø 20 mm with admissible load capacity 160kN (DIN 18216), double-sided tying. |
| Connections | M assembly lock. Stepless, friction-locked with just a few hammer blows. |
| Facings | Specially coated, elastically deformable steel facing. |
| Compatbilitiy | AluStar, StarTec, StarTec XT, Mammut 350, Mammut XT. |
Easy vertical extension
With RS alignment rail and M assembly lock.
Magnetic boxouts
Simple but highly effective. Magnets are used to attach box outs and triangular fillets.
Simple anchor rails
Using anchor rails that fully utilises the load capacity of DW 20 tie rod.
MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.
For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..
Related products and accessories
All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.
Meva FormSet
MEVA’s system-independent accessories include smart solutions like quick anchors, stop-end systems and security systems as well as reusable box-out corners to make your next construction project as easy as possible.
Mammut XT
A heavy-duty formwork has the ability to accommodate fresh concrete pressures of up to 100 kN/m² over the entire surface.
Mammut 350
Mammut, large-scale formwork system. Panelised formwork system. A whole new dimension in formwork efficiency.
STB/SK
STB/SK offers the ideal solution for single sided tying formwork. STB and SK are robust wall braces with great flexibility and can be fitted horizontally or vertically.
Triplex
Triplex is the modular, heavy-duty bracing system for high wall and column formwork. It can also be used flexibly for additional horizontal and vertical support applications.
Let our team help you select the right product.
Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.
Joe Ward
Sales Business Development Manager
UK & Ireland
9 Ninian Pk, Ninian Wy., Wilnecote, Tamworth B77 5ES, United Kingdom
Subscribe to the MEVA newsletter
MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.
