Select your region:
Shoring Systems
MEP
Versatile system for supporting slab formwork, slab tables, beams and precast units at great heights
Safe access to slab formwork
MEVA shoring systems offer efficient, intelligent and easy-to-assemble support solutions. All unnecessary parts have been eliminated, so the systems can be built from just a few basic components and frame types. This streamlines storage, handling and logistics, is cost effective and maximises safety on site.
The choice of modular shoring tower system depends on the slab height and specific shoring function.
MEP is a versatile yet simple system capable of handling virtually any project with only a few basic components: props, extensions and frames.
The greater the clear height, the more cost-effective the assembly of shoring towers becomes. The two MEP props – which can be used independently or in conjunction with reinforcing frames as a shoring tower – provide a seamless interface with slab formwork.
The MEP frames 170 and 220 are perfectly coordinated with the MevaDec system sizes. For greater heights, ladders and tower planking facilitate safe access to the slab formwork, thereby allowing formwork assembly and stripping from below.
Got a specific enquiry about MEP?
Why not call our team on +61 8 8263 4377 (AUS) and +64 275652131 (NZ)
SAS quick-lowering system
An efficient lowering system with automatic reset. The SAS lowers the prop by 1cm with one strike of a hammer, releasing the stress in the prop.
Heavy loads safely supported
SAS quick-lowering system
- Takes load off the prop with one hammer blow
Intelligent MEVA product design
- Inner tube extension adjustable for each individual prop
- Rapid frame connector makes safe connections visible at a glance
- Reinforcing frame fitted to prop with rapid connector
- Adjustable cross-braces for all prop spacings from 90 to 300 cm
- Tube coupler for fixing at any position on profile
- Calotte support to offset sloping surfaces
- All platforms are automatically secured in frames against disengagement
- Lift truck for movement of complete shoring units
Compatible with all MEVA slab systems and MT 60 shoring tower
Maximum flexibility
MEP’s height adjustment makes it the ideal system to:
- shore slab formwork at great heights
- shore table forms (frame construction)
- create table forms used for large slab areas
- support balconies, prefab parts and beams.
For more detailed technical information please refer to the download tab which contains PDF information about this product.
| Technical Information | |
|---|---|
| Performance | Admissible Load Capacity: 30kN load capacity per leg (according configuration). |
| Materials | Steel, Aluminium. |
| Boards | Wooden scaffold planks integrated inside an aluminium frame. Max. load capacity: 200kg/m². |
| Frame | 55cm, 110cm, 170cm, 220cm and 330cm wide frames to reinforce MEP props. |
| Height | From 1.85m up to 21m. |
| Adjustment | Height adjustment with pull out props and spindles. |
| Assembly | Horizontal assembly on the ground. |
| Connection | MEP rapid frame connector. |
| Protection | Hot-dip galvanised profile with surface post-treatment for high ease of cleaning and reduced concrete adhesion. |
| Ganging | By crane, transport spreader, lift truck or transport waler. |
| Compatibility | All MEVA slab formwork systems, compatible with MEP shoring tower. |
Quick Lowering
The SAS quick-lowering system takes the load off the prop with a single hammer blow
Perfect Match
The MEP frames 170 and 220 are perfectly co-ordinated with the MevaDec system sizes.
MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.
For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..
Related products and accessories
All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.
Meva FormSet
MEVA’s system-independent accessories include smart solutions like quick anchors, stop-end systems and security systems as well as reusable box-out corners to make your next construction project as easy as possible.
MT 60
MT 60 Modular shoring towers compatible with all MEVA Slab Formwork systems. Improve the safety and flexibility of operations on your site.
MevaDec
Our latest MevaDec slab formwork system is lightweight and easy to use. It is not bound to a rigid grid pattern, meaning that it can be adapted to suit any building layout and any slab thickness.
MevaFlex
Economical and tried-and-tested, MevaFlex conventional slab formwork provides great flexibility and efficiency.
EuMax Pro
EuMax is the high-performance, all-round, all-purpose prop range. It has a high-grade galvanised finish combined with a large range for fine adjustment
MEVA32
MEVA32 is a strong and flexible shoring system designed to suit many different shoring applications, and save labor, time, and space on the job site.
Our Projects
Examples of projects in your region and around the world
Let our team help you select the right product.
Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.
Viktor Remel
Business Development Manager
Australia
Subscribe to the MEVA newsletter
MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.
