Select your region:
Wall Formwork
StarTec
A cost-effective all-rounder
StarTec is a genuine all-rounder. This multi-purpose formwork boasts a long and impeccable track record worldwide and it’s easy to see why.
Its universal steel formwork is capable of accommodating fresh concrete pressures of 60kN/m² so it’s prepared for any commercial and residential construction challenge.
Robust and universally applicable, StarTec provides you with high efficiency and flexibility because it perfectly complements the compact, lightweight and AluStar formwork as well. Together, StarTec, StarTec XT, and AluStar comprise a product family featuring crane-independent aluminium and large-format steel panels. The only component needed for their universal application is the assembly lock. Combined use of the two systems allows the efficient and flexible deployment of resources to meet all on-site demands.
Got a specific enquiry about StarTec?
Why not call our team on +61 8 8263 4377 (AUS) and +64 275652131 (NZ)
Flange screw
Single component for strong connection of all accessories, such as brackets, push-pull props and alignment rails.
Tie rod fixture
For fixing to multi-purpose profile of upright or horizontal StarTec panels – for fast and safe transportation on site.
Bump notches
Fitted at four corners for panel widths of 135 cm and more to simplify adjustment and alignment with crow bar.
Size
- Up to 8.91m² contact area per panel (330 x 270cm)
Closed hollow steel frame profile
- Structurally robust
- Torsion-proof
- Hot-dip galvanised to facilitate cleaning and reduce concrete adhesion
Smart multifunctional profile
Welded-in Dywidag nuts
- All accessories, such as brackets, push-pull props and alignment rails, are attached with MEVA flange screw
Tying for inclined or stepped-level formwork
- Tie hole with conical steel anchor sleeve, welded in from both sides
Intelligent MEVA product design
- MEVA assembly lock for a structurally continuous connection with only a few hammer blows
- Bump notches for panel widths of 135cm and more to simplify adjustment and alignment with crow bar
- High-quality alkus all-plastic facing with seven-year warranty
Full compatibility with lightweight AluStar and StarTec XT featuring three tying methods in one system
Flexible, universal formwork solution
StarTec is a versatile wall formwork system that works in harmony with the AluStar and StarTec XT wall framework systems. All systems can be combined without the need for adapters. StarTec is ideal for:
- universal applications
- residential and commercial developments
Flange screw
Single component for strong connection of all accessories.
AS assembly lock
Only one component needed for rapid, reliable panel connection: MEVA assembly lock. Allows single-handed fitting at any position along the frame. A few hammer blows suffice to achieve a strong, level and stepless panel connection
Tie rod fixture
Attach to multi-function profile for fast and efficient tie rod storage on the job site
For more detailed technical information please refer to the download tab which contains PDF information about this product.
| Technical Information | |
|---|---|
| Performance | Permissible fresh concrete pressure (to DIN 18218) over entire surface of 60kN/m² (DIN 18202, Tab. 3, Line 6). |
| Materials | Steel. Structurally robust. Torsion-proof. |
| Heights | 330cm, 270cm, 135cm, 90cm, 75cm. |
| Widths | 270cm, 240cm, 135cm, 90cm, 75cm, 55cm, 50cm, 49cm, 45cm, 40cm, 30cm, 25cm, 24cm, 20cm. |
| Largest Panel Size | Up to 8.91m² contact area per panel (330 x 270cm). |
| Profile | 40mm, closed steel profile. High stability and durability. |
| Protective coating | Hot-dip galvanised, surface post-treatment. Easy cleaning and reduced concrete adhesion. |
| Crane Independent | No. Requires crane assistance. |
| Tying System | DW Ø 15mm with admissible load capacity 90kN (DIN 18216), double-sided tying. |
| Connections | Panels: AS assembly lock. Stepless, friction-locked with just a few hammer blows. |
| Orientation | Symmetrical panels. Can be used horizontally and vertically. |
| Components | Inside Corner, Outside Corner, Hinged Inside Corner, Hinged Outside Corner, Stripping Corner, Fillers. |
| Corners | Available panel dimensions allow for trouble-free corner solutions with any wall thickness. |
| Facings | High-quality alkus all-plastic facing. 7-year warranty on all panels. |
| Compatibility | Startec XT, AluStar. |
| Safety | |
|---|---|
| SecuritBasic System | Includes platforms, access ladders, safety cages, front railings, brace frames and side railings in one system. |
MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.
For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..
Related products and accessories
All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.
Meva FormSet
MEVA’s system-independent accessories include smart solutions like quick anchors, stop-end systems and security systems as well as reusable box-out corners to make your next construction project as easy as possible.
StarTec XT
StarTec XT with the integrated combination tie hole utilising three tying methods in one system. Switch between systems without installing additional parts.
Mammut XT
A heavy-duty formwork has the ability to accommodate fresh concrete pressures of up to 100 kN/m² over the entire surface.
Mammut 350
Mammut, large-scale formwork system. Panelised formwork system. A whole new dimension in formwork efficiency.
STB/SK
STB/SK offers the ideal solution for single sided tying formwork. STB and SK are robust wall braces with great flexibility and can be fitted horizontally or vertically.
Triplex
Triplex is the modular, heavy-duty bracing system for high wall and column formwork. It can also be used flexibly for additional horizontal and vertical support applications.
Our Projects
Examples of projects in your region and around the world
Let our team help you select the right product.
Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.
Viktor Remel
Business Development Manager
Australia
Subscribe to the MEVA newsletter
MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.
