Select your region:
Wall Formwork
AluFix
Handset Formwork
AluFix is a lightweight aluminium handset formwork offering complete flexibility when constructing walls. The crane-free assembly and closed hollow profile makes this a versatile modular system that delivers best in class results.
With 50% less components than comparable plastic formwork it makes this a practical and cost effective formwork solution. In addition the wide choice of panel heights and widths gives you the flexibility to accommodate a range of scenarios, whilst the panel gives the perfect finish to facings. It is durable, repairable and sustainable, boasting up to 1000 pours.
As it is also compatible with our EcoAs panels and a wide range of accessories, AluFix is a versatile and cost effective solution for wall and slab formwork.
Got a specific enquiry about Alufix?
Why not call our team on +61 8 8263 4377 (AUS) and +64 275652131 (NZ)
Flange screw
Single component for strong connection of all accessories, such as brackets, push-pull props and alignment rails.
Ergonomic grip profile
Made from stable, closed hollow aluminium profile for safe handling. Low panel weight and ergonomic grip ensure safe, non-strenuous working.
Tie holes
With a conical anchor sleeve welded in from both sides
A cut-away section of tie-hole
Closed hollow profiles
For high stability and long service life. The Aluminium frames are made of three-chamber profiles with welded-in mitred joints. The profiles are equipped with a double groove and edge protection.
EA assembly lock
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.
Internal tie holes
The 90 and 75 cm wide panels are provided with additional internal tie holes, set back from the edge, that allow tying without obstruction by waterstops and simplify the shuttering of foundations.
alkus all-plastic facing
No water absorption. Resistant to swelling and shrinkage. The smooth, robust surface guarantees a high-quality concrete finish, even after heavy use.
Flexible
- 6 Panel heights and 6 panel widths for problem-free corner solutions with any wall thickness (See technical tab)
Crane-independent
- Hand-set formwork, no need for a crane even on existing buildings, terrain, or where a crane is cost prohibitive
Multi-function profile
- Made from closed hollow aluminium profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories
Ergonomic grip profile
- Stable, closed hollow aluminium profile
High-grade powder-coated finish
- Allows ease of cleaning and reduces
concrete adhesion
Closed hollow profile
- Reduced weight, high stability and long service life
Intelligent MEVA product design
- MEVA assembly lock for structurally continuous connection with only a few hammer blows
- High-quality all-plastic facing with long-term, 7-year warranty
Versatile, adaptable and uncompromising
AluFix is the product of choice for crane-free assemblies that are required to deliver top-class results. The wide range of panel sizes provide a flexible solution for a range of applications including:
- residential schemes
- commercial schemes
- civil engineering projects
- municipal and infrastructure schemes
- garden architecture and landscaping projects
- refurbishment projects
Use as wall or slab formwork
Used in combination with the AluFix prop head and EuMax props, AluFix also offers a flexible and efficient slab formwork solution.
Quick and easy
Cast foundations and small walls quickly and easily cast without conventional tying components using foundation tape connected to the panels by tensioners.
Column Formwork is getting easier
AluFix column panels 150/75 and 300/75 allow inch-perfect shuttering for column cross-sections in 5 cm increments up to max. 60×60 cm side length.
For more detailed technical information please refer to the download tab which contains PDF information about this product.
| Technical Information | |
|---|---|
| Performance | (DIN 18218) over full surface of 50kN/m² (flatness tolerances to DIN 18202). |
| Materials | Aluminium, predominantly recycled aluminium. |
| Heights | 350cm, 300cm, 270cm, 250cm, 150cm, 135cm. |
| Widths | 90cm, 75cm, 55cm, 45cm, 40cm, 25cm. |
| Weight | 135 x 90cm panel weighs just 24.1kg. |
| Profile | 23mm, closed aluminium profile for high stability and durability. |
| Protective Coating | High-grade powder-coated finish with an impact- and scratch-resistant surface. Easy to clean. |
| Crane Independent | Yes. Hand-set formwork. |
| Connections | Panels: EA assembly lock. Stepless, friction-locked with just a few hammer blows. |
| Tying System | DW Ø 15mm with admissible load capacity 90kN (DIN 18216), double-sided tying. |
| Orientation | Symmetrical panels can be used horizontally and vertically. |
| Components | Inside Corner, Outside Corner, Hinged Inside Corner, Hinged Outside Corner, Stripping Corner, Fillers. |
| Columns | AluFix column panels 150/75 and 300/75 allow inch-perfect shuttering for column cross-sections in 5 cm increments up to max. 60×60 cm side length. |
| Corners | Available panel dimensions allow for trouble-free corner solutions with any wall thickness. |
| Facings | High-quality all-plastic facing. 7-year warranty. |
| Compatibility | EcoAs. |
Flange screw
Single component for strong connection of all accessories – easily installed by hand.
EA assembly lock
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along the frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.
Internal tie holes
The 90 and 75cm wide panels are provided with additional internal tie holes, set back from the edge by around 20 cm, that allow tying without obstruction by waterstops and simplify the shuttering of foundations.
MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.
For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here.
Related products and accessories
All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.
Meva FormSet
MEVA’s system-independent accessories include smart solutions like quick anchors, stop-end systems and security systems as well as reusable box-out corners to make your next construction project as easy as possible.
AluStar
AluStar universal aluminium hand-set formwork range. Light and easy to handle, it is ideal for crane-free use and many other applications. 100% compatible with the StarTec steel multi-purpose formwork.
EcoAs
EcoAs wall formwork is a robust hand-set formwork. It is a crane-independent steel system with a wide range of panel sizes and cost-effective column panels.
STB/SK
STB/SK offers the ideal solution for single sided tying formwork. STB and SK are robust wall braces with great flexibility and can be fitted horizontally or vertically.
Our Projects
Examples of projects in your region and around the world
Let our team help you select the right product.
Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.
Viktor Remel
Business Development Manager
Australia
Subscribe to the MEVA newsletter
MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.
