Back to top

Wall Formwork


Versatile, cost-effective and robust hand-set formwork

Faced with irregular spaces or uneven terrain and need a versatile, cost-effective and quick-to-assemble solution?

EcoAs is a flexible modular steel formwork system that offers a wide range of panel sizes to tackle awkward floor plans. It also provides trouble-free corner solutions for any wall thickness.

Forget cranes – the compact, ergonomic panel design enables easy, quick and safe assembly by hand, saving time and cutting labour costs.

Smooth, non-absorbent alkus facing can tackle the highest fair-faced concrete requirements, while high fresh concrete pressure absorption enables fast and efficient concreting.

EcoAs is also fully compatible with the lightweight AluFix hand-set formwork, saving you time and money.


Got a specific enquiry about EcoAs?
Why not call our team on +61 8 8263 4377 (AUS) and +64 275652131 (NZ)


EcoAs flange screw being inserted

Flange screw
Single component for strong connection of all accessories.


Multi-function profile (EcoAs)
Made from closed hollow steel profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories.


EcoAs Tie Rod Fixture

Tie rod fixture
For fixing to multi-purpose profile of upright or horizontal EcoAs panels. For fast and safe transportation on site.


Galvanised steel profile
To facilitate cleaning and reduce concrete adhesion.


Closed hollow profile
For high stability and long service life.


Tie hole
With conical anchor sleeve, welded-in from both sides.


Multi-function profile (AluFix)
Made from closed hollow aluminium profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories.



EA assembly lock
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.


alkus all-plastic facing
No water absorption. Resistant to swelling and shrinkage. The smooth, robust surface guarantees a high-quality concrete finish, even after heavy use.

Crane-free steel system


  • For use over a wide range of irregular spaces and terrains


  • Column elements of 350 x 90, 300 x 90 and 150 x 90cm can be used flexibly for different column widths
  • Precise shuttering for column cross-sections in 5cm increments up to max. 75 x 75cm side length, achieving the highest fair-faced concrete requirements
  • Panel heights of 350 to 80cm and panel widths of 100 to 25cm for problem-free corner solutions with any wall thickness

AluFix compatible

  • Use with AluFix as a cost-effective option with the alternative 12mm multi-ply timber panel


  • Ideal for hard-to-access, irregular spaces or uneven terrain where cranes would be time consuming and costly

Cost-effective and flexible for irregular spaces
EcoAs is a versatile and flexible modular formwork system made of hot-dip galvanised and post-treated steel for all applications in building construction and civil engineering. Its wide panel range makes it ideal for hard-to-access and irregular spaces, from light wells, downstand and upstand beams stairways to sewer shafts, and for foundation or floor slab formwork. It can also be used as a secondary formwork to spare your main system – the options are endless.

  • Columns
  • Foundations
  • Walls
  • Residential and Commercial

For more detailed technical information please refer to the download tab which contains PDF information about this product.

Technical Information

Permissible fresh concrete pressure (DIN 18218) over full surface of 50kN/m² (flatness tolerances to DIN 18202, Tab. 3, Line 6).


Steel. Structurally robust. Torsion-proof.


300cm, 240cm, 160cm, 150cm, 120cm, 80cm (350cm = Column Panel).


100cm, 80cm, 55cm, 50cm, 45cm, 40cm, 30cm, 25cm.


23mm, closed steel profile for high stability and durability.

Protective Coating

Hot-dip galvanised, surface post-treatment. Easy cleaning and reduced concrete adhesion.

Crane Independant

Yes. Hand-set Formwork.

Tying System

DW Ø 15mm. Admissible load capacity 90kN (DIN 18216), double-sided tying.


Panels: EA assembly lock. Time-saving, stepless, friction-locked with a few hammer blows. Welded-in Dywidag nuts
Accessories: Welded-in DW-15 nuts, for quick and force-fit attachment of accessories with a single flange screw.


Symmetrical panels. Can be used horizontally and vertically.


Column Panel, Inside Corner, Outside Corner, Hinged Inside Corner, Hinged Outside Corner, Fillers.


Available panel dimensions allow for trouble-free corner solutions with any wall thickness.


High-quality alkus all-plastic facing. 7-year warranty on all panels.



Multi-purpose panels

With perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc.

MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.

For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..

Related products and accessories

All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.

Our Projects

Examples of projects in your region and around the world


Let our team help you select the right product.

Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.

These fields are required

This field is for validation purposes and should be left unchanged.

Subscribe to the MEVA newsletter

MEVA news, worldwide projects and tips & tricks from formwork professionals, digitally and directly to your inbox.


Close search and go back to site