Back to top

Wall Formwork

MevaLite

Best-in-class weight-to-performance ratio

Lightweight and adaptable modular system

MEVA systems stand above the rest in quality, efficiency, and practical detailing. The smart, easy-to-use MevaLite hand-set formwork is no exception. It can be used in conjunction with all MEVA’s complementary climbing, slab, and single-sided formwork systems for a complete solution to any engineering or construction site need. This makes the system ideal for everything from foundation pours and slab edges to large projects.

MevaLite is a lightweight aluminum vertical formwork system that offers flexibility and cost-savings on the job site. Equipped with a range of sizes, including multi-purpose panels, MevaLite offers an easily adaptable formwork solution due to its wide range of possible height and width combinations and the ability to connect the panels in a vertical or horizontal position.

MevaLite can be erected as a hand-set system or easily built as a gang and flown using
a crane on large residential, commercial and civil projects. Thanks to the wide selection of panel sizes, all common wall thicknesses can be formed with only a few filler areas.

With standardised system components, minimal parts and an entire portfolio of other products that work with MevaLite, it combines all the features that make MEVA products the best solution for any project or job site.

 

Got a specific enquiry about MevaLite?
Why not call our team on +1 937 328 0022

Lightweight hand-set formwork

1

Multi-function profile
Made from closed hollow aluminum profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories, all attached with MEVA flange screw.

2

mevalite-formwork-flange-screw

Flange screw
Single component for strong connection of all accessories, such as brackets, push-pull
props and alignment rails.

3

mevalite-lightweight-ergonomic-formwork

Ergonomic grip profile
Made from stable, closed hollow aluminum profile for safe handling.
Low panel weight and ergonomic grip ensure safe, non-strenuous working.

4

Tie rod fixture
For fixing to multi-purpose profile of upright or horizontal AluStar panels – for fast and
safe transportation on site.

5

High-grade powder-coated finish
To facilitate cleaning and reduce concrete adhesion.
Considerable time and resources are saved on cleaning the formwork due to its reduced concrete adhesion.

6

Closed hollow profile
For high stability and long service life.
The Aluminum frames are made of three-chamber profiles with welded-in mitred joints. The profiles are equipped with a double groove and edge protection.

7

meva-assembly-lock-mevalite

EA assembly lock
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.

8

Tie Pockets
Tie pockets designed for easy integration of taper ties, she-bolts, and thru-rod.

For simple to complex configurations

Lightweight

  • The 6’ x 3’ panel weighs 86 lbs
  • Assembly is possible with just one worker

Job site versatility

  • Ideal for projects with limited time or space for a crane
  • Can be used from foundation walls to high-rise
  • Symmetrical panels adapt to irregular geometries and complex designs with ease

Smart multi-function profile

  • Welded-in Dywidag threaded nuts for accessory attachment
  • All accessories such as brackets, push-pull props, and alignment rails are attached with MEVA flange screw to the multi-function profile
  • Tie pockets designed for easy integration of taper ties, she-bolts, and thru-rods

Articulated corners

  • Welded-in mitered corner joints
  • Articulated corners that are adjustable from 60° to 180°
  • Simple and fast windmill solution for columns

Intelligent MEVA product design

  • MEVA assembly lock aligns and structurally connects the panels with only a few hammer blows
  • Tie-off bars allow access for working on the formwork
  • High-quality, easy-to-clean alkus all-plastic facing with seven-year warranty
  • Panel frame features a closed hollow profile
  • Ergonomic horizontal rails for easy grip and handling
  • High-grade powder coating to reduce concrete adhesion

Many uses, one system
MevaLite can be erected as a hand-set system or easily built as a gang and flown using a crane. It’s ideal for:

  • Foundations
  • Residential
  • Commercial
  • Infrastructure and civil projects.

For more detailed technical information please refer to the download tab which contains PDF information about this product.

Technical Information
Performance

Permissible fresh concrete pressure over entire surface of 1,350psf.

Materials

Aluminum, made predominantly from lightweight recycled aluminum.

Heights

9′, 6′, 4′, 3′.

Widths

3′, 2′-6″, 1′-6″, 1′, 6″.

Weight

The 6’ x 3’ panel weighs 86 lbs.

Profile

9” (23cm), closed aluminum profile for high stability and durability.

Protective coating

High-grade powder-coated finish with an impact- and scratch-resistant surface. Easy to clean.

Crane Independent

Yes. Hand-set formwork.

Connections

Panels: EA assembly lock. Stepless, friction-locked with just a few hammer blows.
Accessories: Welded-in DW-15 nuts, for quick and force-fit attachment of accessories with a single flange screw.

Orientation

Symmetrical panels. Can be used horizontally and vertically.

Corners

Wide selection of panel sizes, all common wall thicknesses can be formed with only a few filler areas.

Facings

High-quality alkus all-plastic facing.
7-year warranty on all panels.

Compatibility

Wide range of MEVA accessories like single-sided support, climbing formwork, etc.

Multi-purpose panels

Available in heights of 9′, 6′, 4′, 3′ and width of 2′-6″.

Multiple Corner Options

Articulated corners adjustable from 60° to 180°.

Reduced Labour

Lightweight aluminum system, needing only one worker to assemble.

Tie Rod Fixture

For fixing to multi-purpose profile of upright or horizontal StarTec panels – for fast and safe transportation on site.

Ergonomic Grip Profile

Easy grip profile allows easy handling in all conditions.

Safety
Safe Working

All MevaLite panels are equipped with tie-off bars that allow for safe working on the formwork. Ergonomic grip profile for safe handling in all conditions.

MEVA provides a wide range of downloads. Here you will find product information, instruction manuals and much more.

For some downloads we may ask you for your email address so we can send your download to your chosen email address. For your convenience these downloads relate directly to this product. You can also find a full range of pdf downloads here..

Related products and accessories

All MEVA systems are designed to be compatible, saving you time and money. We think you might find these products useful.


Let our team help you select the right product.

Talk to one of our MEVA formwork specialists, we can help you with all your formwork needs from the ground up. Let us help with your next formwork project.

These fields are required

Consent(Required)
This field is for validation purposes and should be left unchanged.

Subscribe to our MEVA USA Mailing list

MEVA News, worldwide projects and tips & tricks from formwork professionals, digital and direct to your inbox.

Close search and go back to site